New Holland L220

CroppedImage500278-L220-large.jpg

Skid Steer Loaders L220

 

New Holland’s patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Model L220
Dimensions  
Overall operating height  
with foundry/excavating bucket short lip, in (mm) 151.4 (3845)
with low profile/standard lip bucket, in (mm) 155.6 (3952)
with low profile extended/long lip bucket, in (mm) 160.6 (4080)
Height to  
Bucket hinge pin, in (mm) 121 (3073)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised, in (mm) 114.3 (2902)
Overall length  
without attachment with coupler, in (mm) 105.7 (2697)
with foundry excavation bucket on ground, in (mm) 131.4 (3338)
with low profile bucket, in (mm) 135.4 (3440)
with low profile extended bucket, in (mm) 140.5 (3569)
Dump  
Dump angle, degrees 52
Dump height  
with foundry/excavating bucket short lip, in (mm). 94.5 (2402)
with low profile/standard lip bucket, in (mm). 91.7 (2330)
Dump reach (max height), in (mm) 29.8 (758)
Maximum attachment rollback  
Bucket on ground, degrees 34
Bucket at full height, degrees 88
Wheelbase and Clearance  
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan), in (mm) 8 (203)
Angle of departure, degrees 25
Clearance circle  
without bucket, in (mm) 50.7 (1289)
with 60” inch foundry bucket in carry position, in (mm) NA
with 60” inch low profile bucket on ground, in (mm) NA
with 60” inch extended low profile on ground, in (mm) NA
with foundry bucket in carry position, in (mm) 80.9 (2055) with 72” bucket
with low profile bucket on ground, in (mm) 84.6 (2150) with 72” bucket
with extended low profile on ground, in (mm) 89.3 (2268) with 72” bucket
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Tread width, in (mm) 56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm) 69.1 (1755)
Engine  
Manufacturer/model ISM / N844LTA
Type Diesel 4-stroke, Turbo, D.I.
Cylinder 4
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in³ (L) 135 (2.2)
Fuel injection HPCR Direct
Fuel #2 diesel
Fuel filter Pre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intake Turbocharged Aftercooled with external EGR
Cooling Liquid
Engine speeds  
High idle - no load, rpm 2825 +/- 25
Rated - full load, rpm 2800
Low idle, rpm 1200 +/- 50
Horsepower per SAE J1349  
Gross hp (kW) 67 (50) @ 2800 rpm
Net hp (kW) 64 (47.7) @ 2800 rpm
Peak torque, lb-ft (N•m) 153 (208) @ 1800 rpm
Power Train  
Drive pump mechanical  
Pump to engine ratio 1:01
Displacement, in³ (cc) 2.14 (35)
Flow, gpm (Lpm) NA
Flow at rated engine rpm @100% eff., gpm (Lpm) 25.1 (95)
Charge pressure, psi (bar) 360 (24.5 )
System relief, psi (bar) 5000 (345)
Control Direct mechanical
Drive pump electro hydraulic  
Pump to engine ratio. 1:01
Displacement, in³ (cc). 2.14 (35)
Flow, gpm (Lpm). 25.1 (95)
Charge pressure, psi (bar). 362 (25)
System relief, psi (bar). 5220 (360)
Control. Electro hydraulic
Drive motors  
Max displacement, in³ (cc) 19.83 (325)
Speed @ high idle engine rpm 313
Speed @ optional high speed, rpm 443
Torque @ max displ. and relief pressure, ft-lbs (N•m) 1315 (1783)
Travel speed with spec tires  
Low range, mph (km/h) 7.8 (12.5)
High range (optional), mph (km/h) 11.4 (18.3)
Final drive Single-reduction chain drive
Drive chain  
Size ASA #80
Axles  
Diameter, in (mm) 2 (50.8)
Length, in (mm) 15.1 (384)
Parking brake  
Type. Spring applied, hydraulic release disc
Engagement Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System  
Pumps  
Type.. Gear
Displacement standard aux., in³ (cc) 1.7 (27.8)
Displacement high flow aux., in³ (cc) 0.84 (13.8)
Pump flow, gpm (Lpm) 20.6 (78)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Loader control valve  
Type… 3 spool / open center / series
Relief pressure, psi (bar) 3046 (210)
Hydraulic filter 4 microns / spin on
Cylinders  
Lift cylinder  
Bore diameter, in (mm) 2.5 (63.5)
Rod diameter, in (mm) 1.75 (44.45)
Stroke, in (mm) 26.8 (681)
Closed length, in (mm) 38.7 (982)
Bucket cylinders  
Bore diameter, in (mm). 2.75 (69.9)
Rod diameter, in (mm). 1.38 (34.9)
Stroke, in (mm). 16.1 (410)
Closed length, in (mm). 24 (610)
Weights  
Operating weight, lbs (kg) 6470 (2930)
Shipping weight, lbs (kg) 6170 (2795)
Service Capacities  
Fuel tank, gal (L) 25.5 (96.5)
Engine oil with filter, qt (L) 7.5 (7.1)
Hydraulic system  
System capacity with filter, qt (L) 34 (32.2)
Chain tanks (per side), qt (L) 7.9 (7.4)
Rated operating load  
50% tip, lbs (kg) 2000 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout forces  
Lift cylinder, lbs (kN) 3450 (15.3)
Bucket cylinder, lbs (kN) 7300 (32.5)
Cycle times  
Raise, sec 3.5
Lower, sec 2.3
Dump, sec 2.6
Roll back, sec 2

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement