Art's Way 1150 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Art's Way 1150

CroppedImage500278-ArtsWay-RotaryRakes-1150-2019.jpg

Rotary Rakes 1150

 

Model 1150 – a higher level of performance

Art’s Way continues to lead the rotary rake revolution with a new generation of design. Additional features provide greater control and operating efficiency along with an even higher level of raking performance with an impressive 11 ft. wide raking width and 14 ft. wide working width.

Height adjustment

Dual front and rear cylinders lift the rake evenly for infinite fine tuning, or raise completely for additional clearance over windrows and waterways. Both cylinders have screw stops for ease of depth control. Full lift height provides 17 inch tine clearance. Screw style jack has convenient “out of the way” storage location.

New generation gearbox

  • Cam adjust lever moves to multiple positions to fine tune the discharge point of the crop.
  • Adjustable cam for fine tuning cam action
  • Heat treated nodular iron cam
  • Wide cam track and rollers
  • Large diameter tine arm shafts (1045 heat treated material)
  • Sealed oil bath housing
  • Large greaseable ring gear and pinion (9.7 to 1 gear ratio)
  • Massive center shaft
  • Reinforced gearbox casting and mount
  • Overall transport width 11 ft. 9 in.

 

Lower frame and axle pivot

  • Structural steel tubing frame for superior lower frame rigidity
  • Clevis style axle mount hinge with large 1-1/4″ greaseable pivot pins
  • “Scissor style” lift links use large 1-1/4 greaseable pivot pins on lower, center and upper pivots

 

Lights, markings, SMV sign

  • Amber lights, visible fore and aft; red lights, visible from rear
  • SMV sign standard
  • Reflective decals indicate overall rake width for safer transport
Model 1150
Working width Up to 14'
Raking width 11'
Transport width 11' 9"
Gear box oil filled fully enclosed
Tine arms 11
Double tines per arm 4
PTO/HP required 40 hp - 540 RPM optional hydraulic
Raking direction left std / right optional
Hydraulic requirement 1800 psi
Weight 1,440 lbs w/tandem axle
Tandem axle standard
Tires 18 x 8.5 x 8 floatation 10 ply
Trans. Lights/SMV sign standard

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement