Brillion HSBA71-1 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Brillion HSBA71-1


Soil Builder HSBA71-1


Advanced Solutions to High Residue Problems

  • 5 to 13 Shank Rigid Frame Models Available
  • Flip-Flop Style Hitch
  • A-Frame Drawbar
  • Ratchet Jack Frame Leveling
  • Single Point Depth Control
  • 4" x 4" Square Tube Weighted Frame
  • 29" Under Frame Clearance
  • Walking Tandem Axles Provide for a Smooth Ride (Model Dependent)
  • 20" Coulter Blades Spaced at 7.5"
  • 7.5" Solid Cast Iron Spools Provide Extra Weight to Cut Through the Toughest Residue
  • 1.5" Square Gang Bolt Prevents Coulters from Sliding in Wet Conditions
  • Hydraulic Depth Control for Coulters (Model Dependent)
  • Dual Nested Spring Shanks Trip up to 5.5"
  • Spring Pressure/Trip Resistance is Adjustable from 550 to 825 lbs.
  • Maximum Operating Depth is 10"
  • One Piece 4" Twisted Shovels Standard Equipment
  • Safety Warning Lights
  • Powder Coat Paint
 Model HSBA71-1
Approximate Weight 4,879 lbs. (2,213 kg)
Working Width 8 ft. 9 in. (2.67 m)
Transport Width 9 ft. 3 in. (2.82 m)
Transport Height 5 ft. 7 in. (1.70 m)
Overall Length 19 ft. 3 in. (5.87 m)
Number of Coulter Blades 15
Coulter Blade Diameter 20 in. (508 mm)
Coulter Blade thickness 7 ga.
Coulter Blade Spacing 7.5 in. (191 mm)
Coulter Bearings Self-Aligning Flange Type
Coulter Protection Compression Coil Spring
Coulter Gang Bolt 1.5 in. (38 mm) Square
Number of Shanks 7
Shank Mount Dual Nested Spring
Shank Type Parabolic
Shank Spacing 15 in. (381 mm)
Shank Working Depth Maximum of 10 in. (254 mm)
Spring Pressure/Trip Resistance 550 lbs. to 825 lbs. (248 kg to 371 kg)
Chisel Points Available 4 in. (102 mm) Twisted Shovels
Under Frame Clearance 29 in. (737 mm)
Frame Structure 4 in. x 4 in. x .25 in. (102 x 102 x 6.35 mm)
Rock-shaft Pivot Bearings Two Piece Cast Iron
Transport Axle Type Single Tire
Main Frame Cylinders 3.5 in. x 16 in. (89 x 406 mm)
Main Frame Cylinder Control External Depth Stop
Coulter Depth Cylinders 3 in. x 8 in. (76 x 203 mm)
Coulter Depth Cylinder Control Depth Control Segments
Tires (2) 11L x 15-8 Ply
Hitch Pin Hole Diameter 1.563 in. (40 mm) Flip-Flop Style Hitch
Safety Warning Lights & SMV Emblem Standard
Safety Chain Standard
Powder Coat Paint, Red Standard
Horsepower Requirements 15 to 20 HP (11 to 15 kW) per Shank
Recommended Operating Speed 5 to 6.5 MPH (8 to 10.5 km/h)

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement