Land Pride STH2024 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride STH2024

CroppedImage500278-Landpride-STH2024-2019.jpg

STH20 Series Spike Tooth Harrows STH2024

 

FEATURES BENEFITS
Chain suspension Permits harrow to follow the terrain for even tooth penetration.
Heavy constructed tooth bars Designed to handled the job.
2 Tooth angles (40° & 22° off vertical) The least aggressive tooth angle (40°) gives the best flow-through of residue. The most aggressive tooth angle (22°) is for fluffing-up the ground such as an arena.
10 Teeth on the ground every foot Provides maximum conditioning of the soil, breaking and spreading of manure and residue, and for even leveling and firming of the soil.
Diamond shaped teeth Helps to break-up material into finer pieces for a more even spreading of material across the ground. Great for seed bed preparation, preparing arena floors, and breaking up clumps of manure blocking sunlight and spreading it over the ground to act as a fertilizer.
Narrow tooth point Cuts through grasses instead of pulling out desirable grasses and plants.
Forged hardened tooth tips Forged hardened tooth tips extends the life of the teeth.
Softer metal at threaded end of teeth Helps resist breakage when striking rocks or other obstacles. Threaded end allows the tooth to be removed for repair or replacement.

LED Signal lights LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Model Number STH2024
Recommended tractor hp Minimum 45 hp
Machine weight 2,100 lbs.
Tongue weight Folded for transport 432 lbs.
Hitch Pull type with clevis
Working width 23' - 7"
Overall working width 23' - 9"
Overall working length 23' - 0"
Overall transport width 8' - 6"
Overall transport height 8' - 8"
Overall transport length 15' - 0"
Rear frame suspension Chain suspension
Size of bars Center section
Wing sections
1 11/16” OD x 84” long
1 11/16” OD x 93” long
Number of bars 8
Number of teeth 244
Construction of spike teeth Diamond shaped tooth x 8 1/2" long. Tip is forge hardened
Number of teeth on the ground per ft. 10.3
Signal lights
7 Pin connector
LED (light-emitting diode)
SAE J560 pin configuration
Tires 4 Ea., 205R15
Wheel hub 4-bolt
Wheel spindles Replaceable
Lift cylinder 3 1/2" x 8"
Wing cylinders 2" x 14"

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement