Land Pride WC1504 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride WC1504

CroppedImage500278-Landpride-WC1504-2019.jpg

WC1504 Wood Chippers WC1504

 

Features Benefits
Quick Hitch Adaptable Quickly and easily attach chipper to tractor with one person.
1/4" Thick Rotor Knife Rotor features 4 replaceable 1/4" hardened steel cutting edges.
Rotor Knives Can Be Rotated When One Cutting Edge Is Worn Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn, rotate rotor knife 180° to a new cutting edge. Less downtime required to sharpen rotor knives.
Rotor Knives Are Replaceable Can replace rotor knives when all cutting edges are worn out
4-Bolt Flanged Bearings Improves bearing life
Cat. 4 Shear-Bolt Driveline Shear-bolt protects the unit when obstructions are encountered
Skid Extension Supports Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.
Adjustable Rotating Discharge Chute With Rotation Stops Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute.
Adjustable Deflector Chute Helps control the distance wood chips will be discharged away from the Wood Chipper.
Self-Feeding System Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute.
Model WC1504
HP Required 20 to 50 HP (Minimum 35 HP for maximum capacity)
Weight 450 lbs.
Hitch Cat. l w/ Quick Hitch capabilities
Upper Hitch Plate Thickness 5/16"
Main Frame Thickness 3/16"
Rotor Housing Thickness 3/16"
Driveline Category Cat. 4 with shear bolt
PTO Speed 540 RPM
Rotor Speed 540 RPM (Direct Drive)
Rotor Size 25"
Chip Capacity 4"
Hopper Inlet Opening 20" x 20"
Chipper Inlet Opening 10" x 4"
Spout Discharge Opening 5 1/4" Square
Rotor Knife Reversible and Replaceable
Number of Rotor Knives 4
Rotor Knife Size 6" x 2" x 1/4"
Rotor Knife Material Hardened Steel (Specifically designed for chipping)
Feed System Self-feed
Feed Height Above Ground 24" to 30" With adjustable stands
Feed Height Adjustment 6 Settings (Includes without adjustable skids)
Chip Chute Position 270 degrees
Discharge Height 58" to 64"
Color Orange, Green & Beige

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement