Land Pride AFM3011 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride AFM3011

CroppedImage500278-Landpride-AFM3011-2019.jpg

AFM3011 All-Flex Estate Mower AFM3011

 

Features Benefits
Counter blade rotation on center and
right-hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up or bogged down by cut grass. Prevents robbing tractor horsepower.
5'-7" (1.7 m) Transport width Meets most city/county codes for transport width.
6" (15 cm) Deck overlap Eliminates skipping when going into a tight turn.
10'-11" (3.5 m) Cutting width
three 48" decks
Sized right for golf courses, cities, schools. Small decks give excellent flexibility.
Sleek frame design, including single
beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips.
AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.)
Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place. No need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
Optional Hydraulic Transport Locks Transport locks can be released easily from the tractor seat while operating the
same tractor control lever that folds and unfolds the mower decks.
Eliminates pulling a rope to release transport locks.
18" Transport tires with tapered roller
bearings
Transport tires offer smooth roading and less grass compaction. Allows grass to
stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles Allows a spindle to be replaced by simply removing one bolt.
Back wheels on side decks in line with transportation tires Allows tighter turns without skips.
Zero turn radius Sleek frame design allows operator to make tighter turns without leaving windrows or skips. The AFM virtually becomes a Zero Turn Mower.
Rigid rear side deck tires. Rigid wheel yokes holds hills and slopes better.
10" Solid rubber deck tires Solid rubber won't go flat.
Square tube gauge wheel arms Gives the mower gauge wheel arms a great deal of "hidden" strength.
Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.
Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit does not meet ANSI specifications.
Rear discharge Even dispersal, discharged items are aimed downward. No rear chains are needed, which tend to clump damp grass.
Rounded front deck edges with no protruding skid shoe Helps protect trees and other obstacles.
1/4" (6 mm) Front edge & all-welded seams Provides extra durability.
Cat. 3 equal angle main driveline Equal angle main driveline allows for tighter turns without harming U-joints in
driveline.
Shear bolt protection Guards against premature gearbox failure. Protects mower deck spindles.
Cat. 3 wing drivelines Designed to withstand start-up torques.
ABS guards No paint to scratch off, lighter weight, no rattling or rust.
Heavy gearbox mounts on center and side mower decks Handles start-up torque better.
Gearbox Horsepower Rating 30-55 hp (22-41 kw)
Gearbox warranty Three year limited gearbox warranty. Demonstrates our confidence in the gearbox's quality and lasting performance.
Sealed for life blade spindle bearings No blade spindles to grease means no guards to remove to grease blade spindles.
Middle spindle sits towards
the back of the mower deck.
Uses less horsepower and allows material to escape the mower deck easier. The
discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers Applies constant tension to belt to run efficiently.
High blade tip speed Lifts grass up for a clean cut and efficient discharge of material.
Tip speed rates are as high or higher than the competition.
Choice of Blade Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs
the soil very little, allowing blades to wear longer.
Medium Lift - Medium suction for lifting grass. Requires less horsepower than high
lift.
High Lift - Greatest suction for lifting grass before cutting. Can take higher
horsepower in tall dense grass. Not recommended in sandy soils.
Mulching - Perfect for leaf mulching.
Discharge type Rear
Cutting width in (m) 132 (3.35)
Overall width in (m) 135 (3.42)
Transport height in (m) 76 (1.93)
Transport width in (m) 67 (1.7)
Overall length in (m) 136 (3.45) in transport position
Weight lbs (kg) 1,952 (885)
Hitch Weight lbs (kg) 374 (170)
Tractor horsepower hp (kW) Minimum 30-55 (22-41)
Hitch Pull type with safety tow chain
Tongue support lb (kg) 2,000 (907) Capacity Screw Jack
Gearbox support in (mm) 1/4 (6) Steel plate
Gearboxes 540 rpm (1)-splitter gearbox and (3)-wing gearboxes
Gearbox lubrication Gear lube 80-90W EP
Gearbox oil capacity pints (L) Three - wings: 1.7 (.8) Splitter: 1.32 (.62)
Main driveline (1) Category lll equal angle
Deck drivelines (3) Category III with shearbolt protection
Cutting height in (mm) 1 to 5 1/2 in 1/2 (25 to 140 in 13 increments)
Deck size and quantity in (m) Three each at 48 (1.22)
Deck overlap in (cm) 6 (15)
Deck thickness ga (mm) 10 (3.4)
Blade drive belt 1 per deck - B-section V belt
Drive belt tensioning Spring loaded idler
Blade bearings Sealed ball bearings
Blade size and type 3 each per deck in (mm) Standard medium lift blades - 1/4 x 2 1/2 x 16 7/8 (6 x 64 x 430) Optional blades - Low lift, high lift, & mulching
Blade overlap in (mm) 3/16 (5)
Blade tip speed fpm (mpm) 16,000 (4900)
Deck tires Ten each, 10" x 3.25", solid rubber with caged roller bearing
Deck wheel spindles in (cm) 1" (25.4) with nylon bushings
Transport tires Two each, 18" x 9.5", sealant with tapered roller bearings
Transport locks Automatic transport locks with pull rope release
Wing flex Twenty three degrees left to right Twenty two degrees front to back
Rear deck flex Thirteen degrees front to back
Hydraulic outlets One set required
Deck lift cylinders Dual acting
Gauge wheel arms Square tubing with 1/4" (6 mm) wall
Turning radius Zero turning radius
Mowing capacity @ 2 mph = 2.68 acres per hour (3.2 km/h = 1.1 hectares per hour) @ 4 mph = 5.37 acres per hour (6.4 km/h = 2.2 hectares per hour) @ 6 mph = 8.10 acres per hour (9.7 km/h = 3.3 hectares per hour)
Signal lights 7 pin connector Incandescent bulb SAE J560 pin configuration

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement