Land Pride AFM4214 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride AFM4214

CroppedImage500278-Landpride-AFM4214-2019.jpg

AFM4214 All-Flex Mowers AFM4214

 

FEATURES BENEFITS
LED Signal lights LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Counter rotation on left hand deck Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn't get covered up nor does it get bogged down by cut grass.
Narrow 6'-8" transport width Not much wider than most tractors, making for safer transport. Meets most city/county codes for transport width
6" Deck overlap (AFM4214)
8" Deck overlap (AFM4216)
Eliminates blade skips when turning. Tighter turns can be made.
Allows for maximum amount of wing deck flex.
Sleek frame design, including single beam hitch and compact deck overlap Design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.
Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place, no need to get off the tractor to lock. Pull rope from tractor seat to unlock.
23" Transport tires with tapered bearings 23" Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with transportation tires Allows tighter turns without skips.
Rigid rear side deck tires Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
Large deck flotation tires with sealant Optional 15" tires for great flotation or 18" tires for even greater flotation. The larger the tire the less compaction in pounds per square inch allowing grass to stand up. Sealant in the tires minimizes flats.
1/4" Gauge wheel arms Gives the mower gauge wheel arms a great deal of "hidden" strength.
Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.
Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit may not meet ANSI specifications.
Rear discharge Even dispersal, discharged items are always aimed downward. No rear chains are needed, which tend to clump damp grass.
Cat. 4 CV main driveline Constant velocity main driveline allows for tighter turns without harming U-joints in driveline, includes slip clutch.
Slip clutch protection Guards against premature gearbox failure. Protects mower deck spindles.
Cat. 2 wing drivelines Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Heavy gearbox mounts on center and side mower decks Handles start up torque.
Gearbox horsepower rating 40 - 70 hp
Gearbox warranty 5 years on parts and labor.
Demonstrates our confidence in the gearbox’s quality and lasting performance.
Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards the back of the mower deck Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers Applies constant tension to belt to run efficiently.
Easy belt tension release Easily release belt tension for changing belt or for winter storage.
High blade tip speed (AFM4214 = 18,396 fpm & AFM4216 = 18, 340 fpm) Lifts grass up for a clean cut
and efficient discharge of material. Tip rates as high or higher than the competition.
Choice of Blade (Low lift standard, Others available thru parts dept.) 
Low Lift Highly recommended in sandy soils where lifting isn't crucial. Disturbs the soil very little, allowing blades to wear longer.
Medium Lift Medium suction for lifting grass. Requires less HP than high lift.
High Lift Greatest suction for lifting grass before cutting. Can take higher HP in tall dense grass. Not recommended in sandy soils.
Mulching Perfect for leaf mulching.
Optional Hydraulic Operated Transport Locks Transport locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. Eliminates pulling a rope to release transport locks.
Discharge Type Rear  Cutting Height 3/4" to 5 1/4" (In 1/4" increments)
Cutting Width 14'-0" Blade Drive Belt 1 B-Section
Overall Width 14'-3" Drive Belt Tension Spring Loaded Idler with Overcenter Release
Transport Height  7'-7 1/2"  Blade Bearing  Sealed Ball Bearings
Transport Width  6' - 8" Blade Overlap   1 1/4"
Overall Length

14'-10" Mowing Position

12'-11" Transport Position

Blades

3 Each Per Deck

Low Lift (5/16" x 2 1/2" x 20 29/32")

Optional Blades:

Medium Lift, High Lift & Mulching

Machine Weight

 W/15" tires = 3,000 lbs.

W/18" tires = 3,150 lbs.

Blade Spindle Speed 3,362 R.P.M.
Tractor Horsepower Minimum 40 HP / Maximum 70 HP  Blade Tip Speed  18,396 F.P.M.
Hitch

 Pull Type with Adjustable Clevis and

Safety Tow Chain

Deck Tires

 10 each, Air tires with Sealant

18 x 9.5 or 15 x 6.6

Tongue Support  2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4" w/Nylon Bushings
Gearbox Support  3/8" Steel Channel  Transport Tires  2 each, 23 x 10.5 with Sealant
Gearboxes 540 RPM (1)-Splitter & (3)-Wing  Transport Locks Automatic with Pull Rope Release
Gearbox Lubrication  Gear Lube 80-90W EP  Turning Radius  Zero Turning Radius
Gearbox Oil Capacity

 3 - Wings: 3.5 Pints

SD Splitter: 2.125 Pints or

OMNI Splitter: 2.5 Pints

Mowing Capacity

@ 2 mph = 3.39 Acres Per Hour

@ 4 mph = 6.78 Acres Per Hour

@ 6 mph = 10.17 Acres Per Hour

Anti-Scalp Roller

Front Center and

Outside Deck Corners

Wing Deck Flex

 23 Degrees Left To Right

22 Degrees Front To Back

Main Driveline (1) 

Cat. lV Constant Velocity

with Slip Clutch

Center Deck Flex

10 Degrees Left To Right

22 Degrees Front To Back

Deck Drivelines (3)  Cat. II Hydraulic Outlets  1 Set Required
Deck Size & Quantity 3 each / 60"  Deck Cylinders Dual Acting
Deck Overlap  6" Gauge Wheel Arms 1/4" Wall Square Tubing
Deck Thickness 3/16"    

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement