Land Pride RCM5615 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride RCM5615

CroppedImage500278-Landpride-RCM5615-2019.jpg

RC5615 Rotary Cutters RCM5615

 

Features Benefits
Surpassed rugged industry
standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures according to ISO 4254-13..
Factory assembled Saves customer set-up time and money.
7 Year gearbox warranty* Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes Capable of handling heavy cutting applications.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft Large output shaft handles shock loads better.
2 Piece shield on wing gearboxes Driveline grease zerks are easier to access.
Self-leveling hitches Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue Ideal for smaller horsepower tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch Allows for a tighter turning radius.
Adjustable park jack angle Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline:
Cat. 6 CV or Cat. 5 conventional
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches:
RC56 Series: Cat. 4 standard
RC66 Series: Cat. 5 standard
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of
driveline cross journals
Intermediate and wing driveline cross journals are easier to grease.
All drivelines have access holes for greasing the U-joints and inner profiles.
High blade tip speed Allows clean cutting of material and even distribution.
6" Blade overlap Eliminates skipping during turns.
High cutting capacity Can cut brushy areas with saplings up to 4" with 56 Series and 4 1/2" with 66 Series.
Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Reinforced leading edge Front of deck can withstand heavy brush and saplings.
12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.
10 Gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.
3/16" Stump jumper backed with a
1" thick mounting bar
Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough
conditions.
Beveled skid shoes on wings Reduces gouging the ground when turning.
LED Signal lights LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
Greasable wing folding hinges Provides for a long hinge life and allows wings to fold up and down with less stress.
1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Wing transport lock pins Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Collapsible leveling rods Prevents damage and failure to leveling rods.
Enclosed front to rear dual leveling
rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.
Simply remove one bolt to replace damaged spindle.
Wheel options Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
flat.
LP Performance hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option Allows operator to transport on public roads safer when head lights are turned on
and/or when flasher lights are turned on.
Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.
Model Number RCM5615
Horsepower Range 50 to 250 hp (37.3 to 186.4 kw)
Gearbox Horsepower 250 hp (186.4 kw) Splitter
210 hp (156.6 kw) Center & Wing
Gearbox Lubrication Gear Lube 80-90W EP
Gearbox Oil Capacity 5.5 Pints (2.60 L): Divider gearbox
10 Pints (4.73 L): Center deck, LH deck & RH deck spindle gearboxes
Cutting Capacity 4" (10.2 cm)
Tongue Weight 1,860 lbs (843.7 kg)
Machine Weight Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch
5,446 lbs (2470.3 kg)
Blade Tip Speed
AT 540 rpm
AT 1000 rpm
 
Center blades = 16,300 FPM (82.8 mps) Wing blades = 16,300 FPM (82.8 mps)
Center blades = 16,300 FPM (82.8 mps) Wing blades = 16,000 FPM (81.3 mps)
Hitch Types Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack Standard (7,000 lbs)(3175.1 kg)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Normal transport width
Minimum transport width
15' - 0" (4.57 m)
15' - 11 3/4" (4.87 m)
9'-1" (2.77 m)
7'-6" (2.29 m) With transport locks & deflectors removed and cylinders fully retracted
Overall Length 16' - 0" (4.88 m)
Deck Height 12" (30.5 cm)
Cutting Height 2" to 14" (5.1 cm to 35.6 cm)
Lift Hydraulics 3 1/2" Bore x 8" stroke hydraulic cylinder, hoses, fittings & stroke control spacers
Wing Hydraulics 3" Bore x 8" stroke hydraulic cylinders, hoses & fittings
Wing Transport Protection Wing transport lock pins
Deck Material 10 gauge (3.4 mm) top deck and 7 gauge (4.6 mm) bottom deck
Side Skirt Material Bolt-on replaceable 1/4" (6 mm) steel
Skid Shoes
Wing deck
Center deck

Reversible & replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
Replaceable: 2 skid shoes
Blades - 4 (2 per Carrier) 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated free swinging alloy steel with up lift
Blade Overlap 6" (15.2 cm)
Blade Bolt Keyed with hardened flat washer & locknut
Stump Jumper / Blade Holder 3/16" (5 mm) Thick round dish-shaped pan, reinforced with 1" x 5" (2.5 cm x 12.7 cm)
blade bar; or optional shredder kit
Deck Ring Optional 1/2" x 3" (1.3 cm x 7.6 cm) fully welded
Front & Rear Guards Optional rubber, single chain, double chain, or double chain with cable
Input Driveline 540 & 1000 rpm Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate Driveline Category 5 star profile with slip-clutch
Wing Driveline Category 4 star profile with slip-clutch or
optional Cat. 5 w/slip clutch
Tire Options 6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft
tires without foam filling.
Number of Wheels 6 - Wheel option: 4 on transport axle and one on each wing axle
8 - Wheel option: 4 on transport axle and two on each wing axle
Transport Axle Spring-cushioned on trailing arms
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement