Land Pride RCR2660 » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Land Pride RCR2660

CroppedImage500278-Landpride-RCR2660-2019.jpg

RCR2660 & RCR2672 Series Rotary Cutters RCR2660

 

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty Shows Land Pride's confidence in gearbox integrity.
110 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Cat. 4 driveline with 4 plate slip-clutch Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts.
Cat. l or ll 3-point hitch Allows use on a wider variety of tractors.
Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck construction Can withstand more abuse than lighter gauge decks.
1/4" Side panels for overall reinforcement Also protects sides from debris being thrown against them from the blades.
Fully welded deck Robotically welded. Adds additional strength and reduces rust.
Extended front tapered deck Contains and discharges material better.
Round back design Allows for more efficient handling and dispersing of material.
9" Deck Height Allows cutter to handle heavy cutting conditions.
2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 3".
Full length skids with replaceable shoes Full length skids protect side plate structure, replaceable shoes for convenience.
1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
High blade tip speed 60" =12,384 fpm and 72" = 14,861 fpm
3" Dia. cutting capacity Can aid in clearing brush.
Rugged laminated tailwheel Can't go flat. Choice of single or dual combination.
Chain or rubber shield option Located on front and rear. Reduces flying debris.
Driveline Holder Keeps driveline up out of dirt. Easier hook up of driveline.
Model RCR2660
Machine Weight (with Chain Guards) 1002 lbs.
Hitch Category l or ll
Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready
Cutting Width 60"
Overall Width 67"
Overall Length (Including Tailwheel) 114"
Deck Height 9 1/8" (Bottom of Deck to Bottom of Skid Shoe)
Cutting Height 2" - 12"
Cutting Capacity 3"
Recommended Tractor HP 40-130 maximum
PTO Speed 540 rpm
Gearbox 540 rpm PTO Driven Gearbox
1:1.46 Speed-Up Beveled Gears
Cast Iron Housing
Gearbox Lubrication Capacity & Type 7 pints of 80-90W EP oil
Gear box Input/ Output Shaft Size Input Shaft = 1 3/8" - 6 Spline
Output Shaft = 2" Dia.
Deck Construction All welded construction
Deck Material Thickness 10 Gauge
Side Panel Thickness 1/4"
Skids Replaceable
Stump Jumper Round Pan 3/16" x 24"
Blades (2) 1/2" x 4" x 25" Heat Treated Alloy
Steel Free-Swinging High Lift
Blade Bolt Keyed with harden flat washer and lock nut
Blade Tip Speed 12,384 fpm/788 rpm
Driveline ASAE Category 4
Driveline Protection 4 Plate Slip Clutch
Tailwheel Mount Assembly Welded arm and Caster Fork
Tailwheel 4.00 x 8 x 15 Laminated Tire
with cast iron hub and tapered roller bearings
Front Guard Optional: Chain Guard
Available through Parts Department: Rubber Guard
Rear Guard Optional: Chain Guard

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement