Snow Plows 6000 UTV V-Plow » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Snow Plows 6000 UTV V-Plow

CroppedImage500278-SnowEx6000UTV-VPlow.jpg

UTV V-Plow 6000 UTV V-Plow

 

Vertical Reinforcement Ribs
Six vertical ribs support the back of the blade to add strength and protect against twisting.

Lightweight Design
The blade is constructed of
high-strength, low alloy steel components that are stronger and lighter than traditional steel.

Trip-Edge Protection
Independent trip edge protects the plow, UTV and operator when encountering obstacles, and functions in any position (scoop, V, angle or straight). Because only the edge trips, snow loads are never lost.

Responsive Direct Lift

The direct lift system includes a massive cylinder that delivers a wide range of motion, impressive lifting power and high stacking performance.

Standard Double Acting Cylinders
Allows operation of each wing independently or to lock the wings together for efficient straight blade operation and clean back dragging.

Easy Access Components Cover
Hydraulic components are protected with a durable poly cover that is easy to remove for quick maintenance access.

Hand-Held Controls
Choose between the joystick control for easy blade control operation when wearing gloves or the POWER GRIP™ control with backlit buttons. Both feature power “on” and float LEDs and are FLEET FLEX enabled.

Windrowing Position
When angled for windrowing, the leading wing directs more snow into the moldboard to eliminate spill-off. Adjustable to 5’0” or 5’6” widths.

BUCKET BLADE™ Scoop Position
Angle the wings forward to put the plow in scoop mode. Adjustable to 4’7” or 5’1” widths.

V Position
Angle the wings back to put the plow in V position. Adjustable to 5’0” and 5’6” widths.

POWERCOAT Finish
Our high-performance, multi-stage powder coat system provides a long lasting, maintenance-free finish.

Adjustable Center Cutting Edge
Gap can be adjusted to help prevent snow from slipping between pivot edges.

Robotically Welded Headgear
Robotically welded headgear ensures quality and consistency on every SnowEx plow.

Stand-Free Design
Because the blade is stable in the V position for either attaching or detaching, no stand is needed.

Self-Aligning Receiver Brackets
Receivers simplify attachment and are removable when not in use. This enhances ground clearance and ramp angle when using the vehicle during other seasons or when not plowing.

Model 6000 UTV V-Plow
Blade Width 6' 0"
Blade Height 25.75" at hinge/29.25" at end
Angle Cylinders 1"
Plowing Width (Straight) 72" - Straight - 84" w/Wings
60"/66" - Vee - 67"/73" w/Wings
55"/61" - Scoop - 61"/67" w/Wings
Plowing Width (Full Angle) 60"/66"
67"/73" w/Wings
Approx. Weight* 354 lb
Cutting Edge 1/4" x 5"
Construction  
Blade/Wing Thickness 14 ga
Reinforcement Ribs 6
Trip Springs 2 steel

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement