Request A Quote
CHOOSE PARABOLIC OR CHISEL SHANKS
Order the Max-Chisel the way you want it with two different shank combinations: standard chisel or heavy-duty parabolic toggle-trip shanks. When equipped with heavy-duty parabolic toggle-trip shanks, this unit works in the mid-ranges of 8" to 12" – requiring less horsepower than competitive disk rippers that run in the 13" to 15" range – while horizontally fracturing soil much better than a disk chisel. Toggle-trip shanks either run at the set depth or trip – there is no in-between. Both shanks are effective at eliminating ruts and shallow compaction caused by harvest traffic.
EXCLUSIVE CONCAVE TURBO-WAVE BLADES WITH PATENTED “SAMURAI EDGE”
Two opposing rows of exclusive 24" concave Turbo-wave blades aggressively remove root balls while mixing and incorporating crop residue into the top 4" to 5" of soil. This anchors the residue to the ground to accelerate the decomposition process.
INDIVIDUAL DISC MOUNTS
Mounted to individual C-shanks, 24" blades on 15" spacing offer adequate room to clear the flow of trash/residue. They are also designed to perform well in wet conditions.
All blades feature maintenance-free tapered bearings in a cast hub with six-lip interlocking seals to keep grease in and dirt out.
SINGLE-POINT DEPTH STOP
Adjust the depth across the entire width of the machine in one convenient location.
WALKING TANDEM AXLES
Maintain consistent mainframe height for accurate, uniform tillage depth.
OPTIONAL ANGLED REAR CHOPPER WHEELS
Patented angled chopper wheels and 15" shank spacing work together to pull dirt back into shank voids, leveling soil while maintaining the vertically-tilled profile left by the shanks.
OPTIONAL CHOPPER WHEEL WITH ML ROLLER
Choose chopper wheels w/ ML rollers for a smooth, uniform finish.
REAR HITCH OPTIONS
Variety of hitch configurations in long, short, ball, and flex-tongue configurations are available. The rear hitches complement the versatility of the Max-Chisel by enabling cover crop, nutrient application, and other light-duty towed attachments.
|COULTER SPACING||7-1/2" (2 offset gangs at 15" spacing per gang)|
|NUMBER OF SHANKS||19|
|WEIGHT (APPROXIMATE,||22,800 lbs.|
|ENGINE H.P. REQ (MIN)||530+|
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.