Kuhn BTC 190 Trailer » Western Implement, Colorado
x
x
grand junction

2919 North Ave.
Grand Junction, CO 81504
Monday - Friday 8:00am - 5:30pm
Saturday 8:00am - 12:00pm
Sunday Closed Call Us: 970-242-7960 Get Directions
monrose img

4520 North Townsend Ave.
Montrose, CO 81401
Monday - Friday 8:00am - 5:30pm
Saturday 8:00am - 12:00pm
Sunday Closed Call Us: 970-252-1311 Get Directions

Kuhn BTC 190 Trailer for sale at Western Implement, Colorado

Double tap to zoom

Kuhn BTC 190 Trailer for sale at Western Implement, Colorado

Request A Quote

 

Features

THE BOTEC® ADVANTAGE

The Botec® Advantage

A Quality Ration and Complete Cleanout
The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads Due to the cross-mixing action of horizontal auger mixers, Botec® TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge
The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.

RUGGED, DEPENDABLE DRIVE

Redesigned with You in Mind

The drive on the BTC 100 Series mixers has been completely redesigned from previous generations to better handle the torque experienced under the heaviest of commercial loads. This includes upgraded planetary gearboxes and a heavy-duty roller chain operating in a fully enclosed oil bath. Splined shafts and sprockets, along with bolted auger flanges, provide a strong connection and positive power transfer. Heavy-duty bearings are mounted on the outside of the mixing chamber for easy service and long life.

Easy Access Door

The single-handled latch provides easy access to the oil bath. An improved seal keeps oil in, and dirt and debris out, to help minimize wear on drive components and maintain a cleaner appearance.

Enhanced Drive Serviceability

The flanged and bolted augers provide a stronger auger to drive shaft connection. Splined shafts give more positive power transfer and longer service life compared to keyed sprocket-to-shaft connections.

TAILOR YOUR MACHINE

Auger Options to Meet Your Ration’s Needs

The grain-auger option provides gentle handling of more delicate feeds like flaked corn to maintain ration quality and prevent fines. The roughage-auger option features notched, sectional flighting with welded-in, self-sharpening, hardened knives for better hay handling. With the Roughage Maxx® system, scalloped knives are added to the lower augers to maximize hay processing. The knives provide a more consistent particle length and more even blending. The result is a more uniform and palatable ration with reduced sorting for improved feed efficiency.

Multiple Discharge Options

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor, 3-auger discharge or a 4-auger discharge to be equipped on your BTC 100 Series mixer.

Slide Tray
The side discharge slide tray has simple hydraulic controls and helps guide feed further away from the tire path. Magnets are standard on slide tray.

Chain and Slat Conveyor
Rugged chain and slat conveyor options provide the ultimate in durability and long life. Heavy-duty components ensure reliable service and multiple conveyor length options offer unmatched flexibility to match different feeding situations.

3-Auger Discharge
The 3-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides smooth, even discharge. Long lasting, poly chute liners help prevent rust and limit wear. The 3-auger discharge comes standard with fixed tip-off and built-in magnets.

4-Auger Discharge
Center-rotating augers bring the feed to the center of the discharge to increase overall capacity and provide a smooth, even discharge for all ration types. The 4-auger discharge comes standard with power tip-off and built-in magnets. The discharge augers are simple to remove for easy service. Long-lasting, replaceable polyethylene chute liners prevent rust and limit wear. As with the main auger drive, the discharge auger shafts are splined for a more positive power transfer and longer service life. The simplified drive design, featuring only two chains and a remote grease bank, results in in easy service and maintenance.

Trailer & Truck Models

To suit your operation’s needs, KUHN Knight BTC 100 Series mixers are available in a trailer or truck-mounted configuration. Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not in use for feeding. Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.

Specifications

Model BTC 190 TRAILER
Capacity 900 ft³ (25.5 m³)
Capacity with Extensions 1,000 ft³ (28.3 m³)
Maximum Net load 27,000 lbs (12,250 kg)
MIXER DIMENSIONS  
Overall Height Single - / Tandem 130 '' (330 cm)
Overall Height - With Extensions Single - / Tandem 138 '' (351 cm)
Overall Length 295'' (749 cm)
Mixing Chamber Length 216'' (549 cm)
Overall Width - Mixer Only (No Discharge) 101'' (257 cm)
Tread Width - Tandem Axle 102'' (259 cm)
MIXING SPECIFICATIONS  
PTO Minimum Power Requirement 130 hp (97 kW)
Lower Auger Flighting Diameter 28'' (71 cm)
Lower Auger Tube - Outside Diameter 8 5/8'' (22 cm)
Lower Auger Drive Shaft Diameter 4'' (10.2 cm)
Lower Auger Flighting Thickness - Front / Rear 3/4'' (1.9 cm) / 5/8'' (1.6 cm)
Upper Auger Flighting Diameter 28'' (71 cm)
Upper Auger Flighting Thickness 3/8" (1 cm)
Upper Auger Tube - Outside Diameter 6 5/8'' (16.8 cm)
Upper Auger Drive Shaft Diameter 3 1/2'' (8.9 cm)
Lower Auger Tube - Wall Thickness 1/2'' (1.3 cm)
Upper Auger Tube - Wall Thickness 9/16'' (1.4 cm)
Roller Chain Drive 120 - 140H
TUB & TRAILER CONSTRUCTION  
Axle Configuration Tandem axle
Hitch Clevis
Unit Weight 22,600 lbs (10,250 kg)
Weighing System Four-Point
Door Opening Size 40'' x 31'' (102 x 79 cm)
Sidewall Thickness Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm)
End Panel Thickness - Front and Rear 1/4'' (0.6 cm)
Auger Hopper Thickness 3/8'' (0.4 cm)
Highway Light Kit Standard
DISCHARGE DIMENSIONS  
Slide Tray - Tandem Axle - Maximum Reach 2'' (5 m)
Slide Tray - Tandem Axle - Maximum Height 20'' (51 cm)
Slide Tray - Tandem Axle - Transport Width 105'' (267 cm)
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off Pivot 10''/17''/24'' (25/43/61 cm)
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off End 26''/33''/40'' (66/84/102 cm)
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off Pivot 42''/46''/51'' (107/117/129 cm)
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off End 37''/42''/47'' (94/107/119 cm)
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width - Tandem Axle 111''/115''/118'' (282/292/300 cm)
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Maximum Reach 13"/23"/33" (33/58/84 cm)
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Maximum Height 49"/56"/63" (124/142/160 cm)
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Transport Width 107"/116"/122" (272/295/310 cm)

Farm & Ranch Supplies

Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark. 

Want pricing on a specific piece of equipment?
Fill out the form below to request a custom quote!