Request A Quote
Superior Feed Movement
Cone-Style Auger & Kicker Design
Cone-style augers provide superior feed movement for faster, more complete mixing and processing. The smooth, continuous auger flighting (1) creates a rolling feed action that improves mixing. The swept back kicker (2) is formed rearward to efficiently charge the door with feed the entire way on each pass for even discharge and decreased unloading time. The adjustable, replaceable lead-flighting scraper (3) is angled to guide feed up the auger flighting for efficient movement.
Large, 15” or 20”, replaceable hay cutting knives are available to best handle the material to be processed. The knives have two positions to adjust the aggressiveness of the knife angle. Versatility of knife length, angle and position allow for an optimal setting with a wide variety of ration ingredients.
A: Knife set in for slicing and cutting
B: Knife set out for grabbing and tearing
Efficient Mixing Chamber
Improvements to the mixing chamber work in combination with the redesigned augers to increase feed movement. Straighter sides, smoother curves and steeper baffles help promote a fast, complete mix for a fluffy, palatable ration. No preprocessing or special loading is required for round or square bales making it easy to load and use. Faster auger speeds also provide quicker, more complete cleanout.
Adjustable Hay Stops
The adjustable hay stops provide flexibility in processing to provide you with the cut length necessary to reach the optimal nutritional value you’re striving for. This adjustability makes hay processing more efficient and helps minimize overprocessing.
Simple, Dependable Drive
Patented Split Drive
The patented drive system on the VT 256 and 268 models consists of a 2-speed, split-drive gearbox, two planetary gearboxes and two torque-disconnect PTOs. This system provides reliable performance and long service life with a simple and quiet design.
The 2-speed, split-drive gearbox provides the flexibility of high and low speeds without adding another gearbox. It allows for a lower horsepower and easier starting speed (28 rpm in low) while also having a high speed for fast mixing and more complete cleanout (41 rpm in high).
The gearbox can be shifted manually on the machine or with an in-cab electric shift option for operator convenience.
The twin planetaries are designed to provide dependable performance and long life. The drive systems allow the use of single-stage planetaries, which produces far less heat for easier cooling.
Two automatically resetting torque-disconnect PTOs provide independent protection for each planetary. This helps guard against obstructions encountered by each individual auger, ensuring reliable service and longer life.
One-Speed or Two-Speed Drive Options
Customers now have a choice of a single-speed or two-speed drive. A single-speed, split-drive gearbox is now offered on the VT 256 and 268 as a more price competitive option for those customers who do not require a low speed for startup. The single-speed option has an auger speed of 37 rpm at rated input speed. The 2-speed, split-drive gearbox is an effective box to provide customer flexibility with a low speed (27 RPM) and a high speed (40 RPM). The low speed allows for a lower horsepower start up and a high speed for mixing and a complete cleanout.
VT 232 and VT 244 Models feature a straight-drive planetary system that provides simplicity for lower torque applications.
Tailor to Your Operation
Multiple Door Options
Various door configuration options on trailed models offer flexibility to fit a variety of feeding situations. The large discharge openings provide fast, even unloading from front, side and rear door locations for maximum efficiency.
Choose a front door for clear visibility of the material coming out of the door. The front cross conveyor uses rugged components for unmatched dependability. A heavy-duty, steel floor on the VT 232-268, along with the heaviest conveyor chain in the industry, helps ensure long life and less down time. New discharge options provide the ultimate in versatility to match most feeding situations.
Truck models offer a left-side door, while trailer models offer doors on either or both sides. The large openings allow fast unloading with comparable feed flow out of one door that many competitive machines get with two.
A rear commodity door is available on VT 244-268 models. The large opening provides fast discharge, even with high-roughage premixes. A discharge tray is included on truck models to direct material flow for clean, accurate feed placement.
Trailer or Truck Configuration
To suit your operation’s needs, KUHN VT 200 Series mixers are available in a trailer or truck-mounted configuration.
Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not being used for feeding.
Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.
|CAPACITY||VT 232 TRAILER (FRONT|SIDE)|
|Capacity||320 ft³ (9 m³)|
|Capacity with Extensions||360 ft³ (10.2 m³)|
|Maximum Net load||10,800 lbs (4,900 kg)|
|Overall Height||88" (223 cm)|
|Overall Height - With Extensions||95" (241 cm)|
|Overall Height - With Hay Retention Ring||93" (236 cm)|
|Overall Length||235" (597 cm) | 210" (533 cm)|
|Mixing Chamber Length||164" (417 cm)|
|Overall Width - Mixer Only (No Discharge)||90" (229 cm)|
|Tread Width||86" (220 cm)|
|Number of Augers||2|
|Auger RPM - Standard / High Speed||NA/41|
|PTO Drive||540 RPM|
|PTO Minimum Power Requirement||75 hp (56 kW)|
|Knives per Auger (Standard / Maximum)||3/5|
|Auger Diameter||69" (175 cm)|
|Lower Auger Flighting Thickness||5/8" (1.6 cm)|
|Upper Auger Flighting Thickness||1/2" (1.3 cm)|
|TUB & TRAILER CONSTRUCTION|
|Axle Configuration||Single Axle|
|Hitch||Clevis or Spade|
|Spindle Diameter||2 7/8" (7.3 cm)|
|Unit Weight||Min. 8,200 lbs (3,690 kg) - Max. 10,400lbs (4,710 kg)|
|Tongue Weight - % Gross||10%|
|Discharge Door Location||Front, Left, Left & Right, Right|
|Door Opening Size||36" x 40" (91 x 102 cm) | 36" x 40" (91 x 102 cm)|
|Rear Door Opening Size||-|
|Floor Thickness||1/2" (1.3 cm)|
|Sidewall Thickness||1/4" (0.6 cm)|
|Highway Light Kit||Standard|
|Front Conveyor Width||36'' (91 cm)|
|Side Conveyor Width||36'' (91 cm)|
|Slide Tray - Transport Width||92" (234 cm)|
|Slide Tray - Maximum Height||8" (21 cm)|
|Slide Tray - Maximum Reach||15" (38 cm)|
|Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Maximum Height||28"/35"/42"/49"/56" (72/90/107/125/142)|
|Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Maximum Reach||28"/38"/48"/58"/68" (71/97/122/147/172 cm)|
|Side Belt Conveyor - 36"/48"/72"/96" (91/122/183/244 cm) - Maximum Reach||38"/47"/67"/85" (96/121/171/215 cm)|
|Side Belt Conveyor - 36"/48"/72"/96" (91/122/183/244 cm) - Maximum Height||35"/42"/55"/68" (89/106/141/172 cm)|
|Front Incline Chain & Slat Conveyor - 36"/48" (91/122 cm) - Maximum Reach||30''/40'' (75/103 cm)|
|Front Incline Chain & Slat Conveyor - 36"/48" (91/122 cm) - Maximum Height||37''/42'' (94/106 cm)|
|Front Conveyor Travel - Left or Right||8" (20 cm)|
|Front Flat Chain & Slat Conveyor - Maximum Reach||10" (25 cm)|
|Front Flat Chain & Slat Conveyor - Maximum Height||22'' (59 cm)|
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.