Request A Quote
Features
- Laser Cut, Robotically Welded Frame
- 5 1/2” Lift Axles with Maintenance-Free Lift System
- Walking Tandems on All Sizes
- Slip-In Spindles
- 12.5L x 15-12 Ply or 380/55R x 16.5 x 12 Tires (Model Dependent)
- Self-Leveling Hitch
- Cast Single Lip Hitches Cat. III on 9 and 11 Shanks; Cat. IV on 13 and 15 Shanks
- Single Point Depth Control
- 24” x 1/4” Disc Blades Spaced at 10 1/2”
- Heavy-Duty Scrapers
- 1 3/4” Gang Bolt
- Trunnion Mount Bearings
- C-Cushion Bearing Mounts
- Hydraulic Disc Gangs (Front and Rear Gangs Operate on Single Remote Circuit)
- Overlapping Front Disc Gangs
- Staggered Shank Arrangement
- Auto-Reset Shanks with 32” Under Frame Clearance
- Choice of Chisel or Ripper Shank Legs
- Choice of Chisel or Ripper Points
- Adjustment/Maintenance Wrenches
- Blue Powder Coat Paint
- Safety Warning Lights
Specifications
Product Attributes | 2211-11 |
Approximate Weight | 14,910 lbs. (6,763kg) |
Working Width | 13 ft. 9 in. (4.2 m) |
Transport Width | 17 ft. 1 in. (5.2 m) |
Transport Height | 6 ft. 2 in. (1.9 m) |
Front Gang Width | 13 ft. 7 in. (4.1 m) |
Rear Gang Width | 16 ft. 4 in. (5.0 m) |
Number of Disc Blades - Front | 18 |
Number of Disc Blades - Rear | 20 |
Blade Spacing - Front | 10.5 in. (267 mm) |
Blade Spacing - Rear | 10.5 in. (267 mm) |
Blade Size | 24 in. x 0.25 in. (610 mm x 6.35 mm) |
Blade Scrapers | 4.5 in. (114 mm) |
Blade Scraper Mount | Heavy-Duty 0.5 in. (13 mm) Spring Steel Arm |
Gang Spools - Front | 5.5 in. (140 mm) Diameter |
Gang Spools - Rear | 5.5 in. (140 mm) Diameter |
Gang Angle - Front | 14 or 18 Degrees |
Gang Angle - Rear | 12 or 16 Degrees |
Gang Shaft | 1.75 in. (44.5 mm) Round |
Number of Gang Bearings - Front | 6 |
Number of Gang Bearings - Rear | 6 |
Gang Bearing Type | C-Cushion Trunnion Mount, Greaseable Triple Lip Seals |
Number of Shanks | 11 |
Shank Spacing | 15 in. (381 mm) |
Shank Mounts | Integral Frame Mounts |
Point Load - Auto Reset | 1,750 lbs. (794 kg) |
Trip Height | 14 in. (356mm) |
Under Frame Clearance | 32 in. (813 mm) |
Chisel Shank Size | 1.25 in. x 2.5 in. (31.8 x 63.5 mm) |
Auto-Reset Ripper Shank Size | 1.25 in. x 3.0 in. (31.8 x 76.2 mm) |
Standard Points - Chisel Shank | Reversible Point |
Standard Points - Auto-Reset Shank | V-Cap Chrome Point |
Frame | 8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 (153 x 102 x 9.5 mm) |
Frame Construction | Laser Cut/Matchcut Components, Robotically Welded |
Transport Lift Axles | 5.5 in. (140 mm) with UHMW Maintenance Free Pivots |
Transport Axle Type | Walking Tandems with Greaseable Pivots |
Tire Size | (4) 12.5L x 15 Hwy Service Tires (Load F) |
Wheel Hubs | 8-Bolt |
Spindles | 2.25 in. (57.2 mm) Slip-In Spindles |
Hitch Type | Self-Leveling with Manual Adjustment |
Hitch Category | Cat. III Single Lip with 2.0 in. (50.8 mm) Hole |
Machine Depth Control | Single Point, Front Mounted |
Safety Warnings Lights and SMV Emblem | Standard |
Safety Chain Kit | Standard |
Adjustment Wrenches | Standard |
Powder Coat Paint, Blue Sapphire | Standard |
Rear Jack | Standard, When Equipped with Chopper Reel |
Cat. III Single Lip Hitch Clevis (2 in. Hole) | Standard |
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) | Optional |
Cat. V Single Lip Hitch Clevis (3 in. Hole) | N/A |
Shark Fin Point (Ripper Shanks) | Optional |
2 in. Chrome Cap Point (Chisel Shanks) | Optional |
Spare Tire & Wheel Assembly | Optional |
Horsepower Requirements | 30 to 40 HP (22 to 30 kW) per Shank |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.