Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| Cat. 5 driveline with 4-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Cat. II and III 3-Point Hitch Options with Quick Hitch Capability | Fits a wide variety of tractors. Quick Hitch provides for fast hook-up. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Pull-type hitch option | Fits older tractors without a top link and smaller tractors without enough lift capacity. |
| 84" Cutting width | Wide cutting width, reduces cutting time in the field. |
| Heavy deck construction with 3/16" deck top & 1/4" side skirts | Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades. |
| Fully welded deck | Adds additional strength and deck integrity. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 13 3/8" Deck height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 4". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks, and debris. |
| High blade tip speed | Ensures clean cut. |
| 4" Dia. cutting capacity | Can aid in clearing brush. |
| Dual laminated tailwheels | Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter) | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Wheel bearings (Pull-type cutter) | Tapered roller bearing in cast iron hub. |
| Optional guarding | Protect against flying debris. |
Specifications
| Model Numbers | RCF3684 3-Point Type | RCF3684 Pull-Type |
| Machine weight | 2,000 lbs. (907.2 kg) With front & rear single chain guards | 2,104 lbs. (954.4 kg) With hydraulic adjustment and front & rear single chain guards |
| Hitch | Category II or III with floating clevis top link, Quick Hitch adaptable |
Pull-type with clevis |
| Pull type tongue weight | N/A | 894 lbs. (405.5 kg) |
| Cutting width | 84" (2.13 m) | |
| Overall width | 90 1/2" (2.30 m) | |
| Overall length | 130" (3.30 m) | 179 1/2" (4.56 m) |
| Deck height (Bottom of deck to bottom of skid shoe) |
13 3/8" (34.0 cm) | |
| Cutting height | 2" - 12" (5.1 cm to 30.5 cm) | |
| Cutting capacity | 4" (10.2 cm) Diameter | |
| Recommended tractor horsepower | 70-190 hp (52.2-141.7 kw) | 50-190 hp (37.3-141.7 kw) |
| Power take-off Speed | 540 rpm | |
| Gearbox | 1:1.21 Speed-up beveled gears, Cast iron housing, 1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft |
|
| Gearbox lubricant | 80-90W oil | |
| Gearbox oil capacity | 10 pints (4.73 L) | |
| Deck construction | All welded deck | |
| Deck material thickness | 3/16" (5 mm) | |
| Side skirt material thickness | 1/4" (6 mm) | |
| Skid construction | Replaceable bolt on skid shoes | |
| Stump jumper / blade holder | 3/16" (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar | |
| Blades (2) | 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel free-swinging high lift - low friction | |
| Blade bolts | Keyed with harden flat washers & locknuts | |
| Blade tip speed | 14,369 fpm (73.0 mps) | |
| Driveline | ASAE category 5 with 4-plate slip clutch | |
| Driveline protection | 4 plate slip clutch | |
| Transport axle | Cushioned shock absorption | |
| Rear deck height adjustment options | Ratchet jack or hydraulic cylinder | |
| Tailwheel | 4" x 8" x 15" Laminated tire with cast iron hub (3-Point type); 4" x 8" x 21" Laminated tire with cast iron hub (Pull type) | |
| Front guard | Optional: Rubber belting, single chain guard or double chain guard | |
| Rear Guard | Optional: Single chain guard or double chain guard | |
| Jack Stand | Jack stand on tongue of pull-type cutter | |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.