Tigercat 855E Feller Buncher » Serving Montrose, Loghill Village, Olathe, Delta, Cimarron, Grand Junction, Palisade, Fruita, Loma, Colorado

Tigercat 855E Feller Buncher


Track Feller Bunchers 855E Feller Buncher


The Tigercat 855E feller buncher can be equipped with a range of Tigercat felling heads including a bunching saw or shear for smaller diameter timber or the single post 5702 felling saw for larger trees and mixed diameter stands.

In addition, the 855E can be equipped with the 5185 fixed felling saw for felling, bucking and shovel logging high value and oversize timber.

With a fuel efficient engine, refined hydraulic circuits and Tigercat’s unique ER boom technology, the 855E feller buncher achieves maximum tree felling productivity with minimal fuel burn. Operators appreciate the excellent access to daily service points as well as the ergonomic cabin with further improvements in comfort and sight lines.

Tigercat power. Tigercat support.

The 855E feller buncher is Tigercat FPT Tier 2 or Tier 4f powered. Tier 4f conforms to the latest emissions standards in North America and Europe. With the Tier 2 engine configuration, Tigercat brings the benefits of Tigercat power and support to harvesting professionals around the world.

Key Benefits

  • Tigercat FPT N67 engine with Tier 2 or Tier 4f emissions compliance – clean, powerful and efficient; fully supported by Tigercat
  • ER boom technology® improves fuel efficiency, reduces operator fatigue and increases productivity
  • Comfortable, ergonomic cab design with excellent all-around visibility and automotive style finish
  • High capacity cooling system – automatic variable speed for improved fuel efficiency; automatic reversing cycle to purge dust and debris
  • Twin swing drive motors for powerful swing torque, reduced pinion loads and extended swing system life
  • Clamshell-style roof enclosure with swing-out doors on both sides for excellent access to major components and daily service points
  • Hydraulic components are compartmentalized, separate from the engine and cooling system
  • Full length front window and additional floor windows for clear sightline to the tracks
Model 855E
WIDTH 3 430 mm (135 in)
LENGTH less boom 5 280 mm (208 in)
HEIGHT less skylight 3 710 mm (146 in)
GROUND CLEARANCE 710 mm (28 in)
WEIGHT less attachment 35 600 kg (78,490 lb)
TAIL SWING over side 1 360 mm (54 in)
ENGINE Tier 4f Tigercat FPT N67 Tier 4f
RATED 210 kW (282 hp) @ 2,200 rpm
PEAK 210 kW (282 hp) @ 2,200 rpm
ENGINE Tier 2 Tigercat FPT N67 Tier 2
RATED 205 kW (275 hp) @ 2,100 rpm
PEAK 210 kW (282 hp) @ 2,000 rpm
AIR FILTRATION Pre-cleaner and 2-stage engine air cleaner
COOLING Aluminum side by side radiator, oil cooler and charge air cooler
Removable intake debris screen
FAN Hydraulically driven, automatic variable speed, reversible
FUEL CAPACITY 800 L (211 US gal)
DEF CAPACITY 80 L (21 US gal)
PUMP, SAW* Piston
RESERVOIR 225 L (60 US gal)
FILTRATION (5) Spin-on, 7 micron full flow; (1) Water absorbing
CYLINDERS, HOIST (2) 120 mm (4.7 in) bore
CYLINDERS, STICK/ER (2) 110 mm (4.7 in) bore
CYLINDER, TILT 130 mm (5.2 in) bore
CYLINDERS, LEVELING (2) 180 mm (7 in) bore
HORSE POWER CONTROL Electronic speed sensing; All-speed antistall
TRACK FRAMES R7-163L super-duty forestry leveling
Integral track guides/ramp angles
TRACK CHAIN FH400 215 mm (8.5 in) pitch sealed and greased
FINAL DRIVE (2) Piston motors with brake valves; Infinitely variable speed
TRACTIVE EFFORT 367 kN (82,600 lbf)
GEARBOX Triple reduction planetary type with brake
FRONT IDLER Hydraulic track adjuster; Spring shock absorber
ROLLERS, LOWER (10) FH400 excavator type
TRACK SHOE 610 mm (24 in) single grouser
Optional 710 mm (28 in) single grouser
LEVELING 20° forward; 6° rear; +/-17° side
MAXIMUM CUT RADIUS 8 460 mm (333 in)
MINIMUM CUT RADIUS 4 800 mm (189 in)
BARE PIN LIFT full reach 8 440 kg (18,600 lb)
TRACK Friction disc; Automatic spring applied, hydraulic release
SWING Friction disc; Manual spring applied, hydraulic release
SWING DRIVE 8 rpm variable speed; 360° continuous rotation; Double reduction, twin swing drive planetary gearboxes; Twin piston swing motors
SWING BEARING 1 190 mm (47 in) ball circle diameter
ENCLOSURE Perforated plate on doors for ventilation; Hydraulic operated engine enclosure with manual back-up; Vandal protection; Smooth exterior
Rear air intake for cooling
BATTERY (2) AGM, 12 v
ALTERNATOR 110 amp, 24 v
LIGHTING (14) LED; (4) LED service lights, engine enclosure
CAB Insulated, pressurized and isolation mounted A/C, heater, defroster; SkyVIEW and RearVIEW camera systems
Full length poly-carbonate windshield/entry door; Poly-carbonate right and left side windows; One-piece poly-carbonate side door window with
steel guarded upper sliding section for ventilation; AM/FM digital stereo and auxiliary input port; Bluetooth® audio and hands-free calling
(2) power points
CONTROLS Hydraulic proportional for boom/travel/swing with electronic travel speed control limiter; Electronic for leveling; Electric switch for swing brake
and 3-mode ER control; Electronic control system with colour LCD display screen for machine monitoring and function adjustment
SEAT Full suspension air ride, fully adjustable, angled mounting; Armrest mounted Tigercat joysticks
O THER ST AND ARD EQUIPMENT Fuel suction strainer; Alarm for track movement
OPTIONAL EQUIPMENT Cold weather kit; Bolt-on tool box; Electric hydraulic oil fill pump
RemoteLog™ telematics system
FELLING HEAD Flexible hydraulic system to accept various felling heads

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

RANCHRITE hardware available at Western Implement