Skid Steer Brush Grapple SSGR-84
- Lower profile provides easy access to the operator’s seat, even on units with a cab door.
- Lower tines have weld-on tine points, allowing operator to go under logs/brush for easy clean pick-up.
- Gripping notches in upper grapple and lower tines help to retain materials in the grapple rake.
- Pivot points have lubrication capabilities for long service life.
|Overall Width (in/mm)
||84 / 2134
|Overall Depth (in/mm)
||25 / 635
|Overall Height Closed (in/mm)
||42 / 1067
|Grapple Opening (in/mm)
||59 / 1499
|Upper Grapple Width (in/mm)
||19.5 / 495
|Tine Spacing (in/mm)
||15.5 / 394
|Number of Lower Tines
|Reinforcing Tubes Between Lower Tines
|Number of Hydraulic Cylinders
|Cylinder Bore / Stroke (in/mm)
||2 x 10 / 51 x 254
|Cylinder Pressure Rating (psi/bar)
||3000 / 206.9
||"Universal" Skid Steer
|Horsepower Rating (maximum)
||925 / 420
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.