Request A Quote
Features
Simple, Easy Adjustments
With a single-point height adjust, it's easy to vary the Quest's cutting deck. Our 50- and 54-inch mowers are equipped with a foot lift-assist, which eases lifting and lowering the cutting deck. (Optional on 42-inch model)
Engine Protection
Standard, rear engine guard provides increased protection of critical engine components.
Fuel Tank Capacity
A single, 3.0-gallon tank with one fill location keeps you mowing longer with fewer fill-ups.
Commercial-Grade Tires
Standard on Quest mowers, the commercial-grade front caster tires and rear drive tires provide increased traction for superior handling.
Commercial Features
Exmark's Quest S-Series is a premium entry-level zero-turn mower. The proven commercial features have been adapted for consumer use including the tires and fabricated deck.
Professional Styling, Superior Comfort
The Quest S-Series mower has the commercial Exmark styling and provides a premium, ergonomic seat system that delivers a smooth, comfortable ride, even over uneven terrain.
Specifications
| EQUIPMENT | |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm (.67") diameter spindle shaft. |
| Drive Tires | 20 x 10.0-10 Turf Tech TL |
| Tractor Frame | Unibody, riveted 10-guage steel. |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Front Caster Tires | 13 x 6.5-5 smooth-tread, pneumatic. |
| Parking Brake | Automatic-actuated pawl brake. |
| Seat | Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position. |
| Electrical | 12 volt battery with 15-amp alternator |
| Standard Features | Engine hour meter, cup holder and hitch |
| UPC | 193308215648 |
| POWER COMPONENTS | |
| Engine Brand | Kohler |
| Engine Model | KT735 |
| Engine Displacement | 725 |
| Engine Series | 7000 Series |
| Fuel System | Carbureted |
| Engine Speed | 3,300 rpm |
| Air Filter | Standard Engine Manufacturer's air filter |
| Fuel Type | Gas Carbureted |
| Fuel Capacity | 3-gallon (11.0-L), single fuel tank with single fill locations |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | Two Hydro-Gear ZT-2100 hydro static transmissions with no hoses and integrated cooling fans and integrated reservoir |
| Speed | Infinitely variable speed selection from 0-7.0 mph (11.3 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
| ROPS | Optional Rigid ROPS with seat belt and latch. |
| PTO Engagement | Electromagnetic 105-ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Casters | .25" thick caster yoke arms. |
| Engine Spec | 3089 |
| *THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER. | |
| DECKS | |
| Width / Cutting Deck | 54" |
| Deck Style | Floating Deck |
| Deck Style Description | Series 2 fabricated and welded steel deck. Decks have side discharge standard with the option ot bag or mulch. |
| Deck Construction | 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 4 point suspension. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. |
| Blades | 3 Blades at 18.75" Length |
| DIMENSIONS | |
| Width | 65.2 in. (166.0 cm) |
| Length | 76.0 in. (193.0 cm) |
| Height | 46.6 in. (119.0 cm) |
| Curb Weight | 616 |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.