Request A Quote
The Dominator® 4856 coulter module features ultra-large 25" diameter coulters on 9" spacing for improved residue cutting versus discs. An innovative live hydraulic down pressure system allows the operator to set down pressure to match conditions. With constant down pressure the coulters automatically seek the depth that provides optimal cutting resistance. Coulter gangs are mounted with Rock-Flex bearing arms for added protection. Coulters feature PEER® TILLXTREME™ maintenance-free bearings.
A split-the-middle shank pattern is achieved with two ranks of shanks on 18" spacing, none closer than 36" on the same beam. This provides maximum soil fracture and non-stop operation in heavy residue.
Choose from all deep-till parabolic shanks, a combination of deep-till and heavy-duty chisel shanks or all heavy-duty chisel shanks, depending on your agronomic needs.
Double K™ Points
Double K ripper points double the wear life of prior KUHN Krause Dominator fabricated steel and carbide-capped ripper points. Choose the 7” wing ripper point for optimal fracture or 2.5” straight ripper point for reduced draft.
Rear Disc Conditioner
The Dominator® 4856 reverse-tandem disc conditioner system is hydraulically controlled to meet varying surface residue and leveling requirements. Front blades are 24" diameter fluted disc blades on 18" spacing and rear blades are 24" diameter fluted blades on 12" spacing with center-mounted 4 lobe feathering blades to reduce clod size and level soil. Rear discs feature individual Rock-Flex mounts for protection with rear mounts reversed to shed residue for superior performance even in heavy residue conditions.
Maintenance-Free Bearing Assembly
Double row, angular contact maintenance-free bearings feature heavy-duty, multi-lip seals that create a labyrinth system to keep contaminants out of the inner bearing. Each rear bearing has a machine forged spindle with a 5-bolt pattern for fast and easy service.
Heavy-Duty 24/7® Conditioning Reel
Choice of heavy-duty round bar or heavy-duty flat bar reel with Peer® TillXtreme™ maintenance-free bearing assemblies mounted on heavy-duty ductile cast bearing arms provides aggressive clod sizing and soil firming. Optional hydraulic lift available.
|Transport Width (ft/m)||15'10" / 4.8|
|Transport Height (ft/m)||7'5" / 2.3|
|Number of Shanks||9|
|Shank Spacing (in/cm)||18 / 46|
|Coulter Blade Spacing (in/cm)||9 / 23|
|Working Width (ft/m)||13'6" / 4.1|
|Approximate Shipping Weight Less Reel Option (lb/kg)||15,806 / 7169|
|Approximate Shipping Weight with Reel Option (lb/kg)||16,879 / 7656|
|Hitch Type||CAT IV Articulating Ball Hitch for 2" Pin|
|Tongue Type||Mechanical Adjustable, Self-Leveling Tongue|
|Depth Control||Single Point Hydraulic Depth Control|
|Hydraulics||Color Coded Hydraulic Hose Grips, All Hydraulic Hoses|
|Coulter Blades||25" x 1/4" Smooth|
|Coulter Gangs||9 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2"|
|Shanks||Combination (5) Spring Reset Parabolic Sub-soil shanks, 3000 lb Point Load, 1-1/4" x 4" Shank with Wear Bar, 22" Trip Height, 39" Under-frame Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200 lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Under-frame Clearance, 12" Working Depth|
|Points||Double K™ Cast Chromium Carbide, 7 inch Wing, Ripper Point|
|Main Frame Wheels||Four 12.5 L x 16 14 ply, Walking Beams, Slip-In Spindles 8-Bolt Heavy Duty Hubs|
|Wing Frame Wheels||Not Applicable|
|Hydraulic Controlled Rear Disc Conditioner||Front Beam: 24" x 6 gauge, Fluted Disc Blades, 18" Blade Spacing Rear Beam: 24 x 6 gauge, Fluted Disc Blades and Smooth Taper Blades, 12" Blade Spacing Rear Beam: Center-Mounted 4-Lobe Feathering Blades|
|Rear Conditioning Reel||24/7® Soil Conditioning Reel, Heavy-Duty Round Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings|
|Hydraulic Controlled Conditioning Reel||(1) 2" x 3.25" cylinder and hoses per carrier arm|
|Transport Locks and Safety||Hydraulic Valves, Transport and Wing Fold, Slow Moving Sign, High-Visibility LED Lighting|
|Hitch Type||CAT III Articulating Ball Hitch for 1-1/2" Pin|
|Tongue Type||Guardian Hitch™ (Cushion Tongue)|
|Shanks||All Spring Reset Sub-Soil Shanks 3,000 lb Point Load, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance 16" Working Depth|
|Shanks||All Heavy Duty Spring Reset Chisel Shanks - 1,200 lb Point Load, 1-1/4" x 3" Shank Size with Wear Bar, 20" Trip Height, 39" Underframe Clearance 12" Working Depth|
|Points||Double K™, 2-1/2" Cast Chromium Carbide, Straight Ripper Point|
|Tires||360/65R17.5 High Floatation Tires, 8 Bolt Heavy Duty Hubs|
|Rear Conditioning Reel||24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings|
|Rear Conditioning Reel||None|
|Hydraulic Controlled Conditioning Reel||None|
|Recommended Tractor Power Range (PTO hp/ft; kW/m)||270 - 350 / 660 - 856|
|Recommended Working Depth (in/cm)||8 - 16 / 20.3 - 40.6|
|Recommended Operating Speed (mph/km/h)||4 - 7 / 6 - 11|
Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.