Request A Quote
FAST AND RELIABLE WRAPPING
The KUHN large square bale turntable wrappers are equipped with two pairs of steel rollers, with a ribbed profile, This design creates a deep and stable cradle for the bale, ensuring maximum bale traction, even bale rotation and proper film overlap, whatever the bale size. Two large bale support rollers provide additional stability and guidance. Round bales can also be wrapped with these wrappers.
Patented, Conical Pre-Stretcher
The standard pre-stretchers, which hold a 30” (750 mm) roll, are made of aluminum to avoid build-up of tack from the film. Both outer ends of the aluminum rollers are cone-shaped to maintain the optimum width of the film and reduce the risk of film tear. The special ribbed profile of the aluminum rollers keeps air and water away from the film. The location of the pre-stretchers makes it very easy to change the film rolls. The standard pre-stretch of 70% is reached by a low-maintenance and low-noise gear transmission. An optional 60% pre-stretcher gear kit can be installed to change the standard pre-stretch to 60%, rather than 70%, to adapt to difficult wrapping conditions.
Hydraulic, High-Grip Film Cutters
Once the desired number of film layers have been applied, the film is then held firmly and cut. A hydraulic, high-grip film cutter allows you to adjust the cutting moment independent of the table tipping position, resulting in the shortest possible end string. It has a long stroke to help accommodate various bale lengths, and ensures a firm hold and a clean cut of the film in various weather conditions.
GENTLE BALE DISCHARGE
Low-Profile Chassis Design
The KUHN SW 1614 bale wrapper features a unique low-profile design ideal for stability when loading, wrapping or unloading a bale. The rear axle position results in a low table height eliminating the need for an active fall damper. There is constant weight transfer to the tractor that prevents up-and-down movements of the drawbar and prevents tractor wheel slippage when driving uphill with a bale on the table or loading arm. The bale can be dropped on the go for maximum output!
Low Table Height
The low mounted table on the SW 1114 ensures a gentle bale discharge so there is no need for a fall damper. The low mounted height also allows easy replacement of the film rolls.
MANUAL OR COMPUTER CONTROL
Two different control systems are available dependent on model, and driver preferences:
The manual version (M) is controlled with cable levers, and comes standard with the bale-and-wrap counter and autostop. The bale-and-wrap counter counts the film layers and total number of wrapped bales. The autostop function will automatically stop the wrapping table/satellite once the total number of film layers have been applied. This transforms a manually controlled wrapper into a semi-automatically controlled wrapper.
The computer-controlled version (C) uses a control box that provides all the information and features for a fully automatic wrapping process. The integrated joystick automatically steers bale discharge, among other direct functions.
The SW 1114 Computer version (C), with standard RF remote control, can be operated from a loader while using a power pack or second tractor for the oil- and power supply. This creates a one-man operation for loading, wrapping and stacking. Wrapping at the storage site means a minimum risk of film damage. The C version is standard fitted with automatic stop at the end of film/film tear, integrated bale and wrap counter, play/pause function and 90° loading position.
The enhanced SW 1614 Computer controlled version (C), with integrated patented AutoLoad function, has increased overall efficiency and loading and wrapping capacity. The automatically controlled computer system with integrated joystick is standard equipped with automatic stop at the end of film/film tear, and play/pause function. The RF remote control with high distance safety control is optional.
The SW 1614 C can carry a second bale in the loading arm during wrapping. The AutoLoad function offers increased overall loading, wrapping capacity and efficiency. The patented AutoLoad function enables the operator to fully concentrate on the driving process, while the wrapping process is automatically started once the bale has been detected on the loading arm. Picking up a second bale with the loading arm, during the wrapping process for transport, is fully automated.
|SPECIFICATIONS||SW 1614 C|
|Large square bale size - width x height x length||2x3 or 3x3 bales up to 6' long (0.6x0.9 or 0.9x0.9 m bales up to 1.8 m long)|
|Round bale size - width x diameter||(4-5)' x (3x5)' (1.2-1.5 m x 0.9-1.5 m)|
|Maximum bale weight||Standard 1,770 lbs (803 kg) - optional 2,200 lbs (1,000 kg)|
|Transport width||8'2" (2.5 m)|
|Transport height||9'3'' (2.8 m)|
|Loading system||Standard autoload|
|Able to carry second bale on loading arm||Standard|
|Ability to wrap round bales||Standard|
|Wrapping table||Adjustable twin roller pair configuration|
|Bale support roller|
|Control||(C) Computer controlled|
|Semi-automatic operation of (M) version
by bale and wrap counter and automatic table stop
|Automatic stop by end of film / tear||Standard|
|RF remote control (rechargeable)||Optional|
|Fully automatic film cutter||Standard hydraulic|
|Film pre-stretcher||Standard 30" (76 cm) - optional 20" (51 cm)|
|Pre-stretch ratio||Approx. 70% standard - 60% optional|
|Required tractor hydraulic connections||1 SA with free return or 1 DA|
|Output and pressure required||7 gpm at 2,200 psi|
|Road lights and signaling||Standard|
|Ability to turn wheels inside for road transport||Manual standard / hydraulic option|
|Machine net weight||3,375 lbs (1,531 kg)|
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.