Request A Quote
Superior Feed Movement
Cone-Style Auger & Kicker Design
New cone-style augers provide superior feed movement for faster, more complete mixing and processing. The smooth, continuous auger flighting (1) creates a rolling feed action that improves mixing. The top cover of the auger has a steep angle to aid in bale movement when processing round bales and to prevent feed from sitting on top of the auger between mixes. The swept back bolt-on kicker (2) provides a fast and even discharge. Each lead flight is equipped with a cast iron scraper (3) that pulls material away from the tub walls into the auger for a better overall mix. Both the kicker and scraper are bolt-on attachments, making replacement very easy to save you precious time.
Large, 15” or 20”, replaceable hay cutting knives are available to best handle the material to be processed. The knives have two positions to adjust the aggressiveness of the knife angle. Versatility of knife length, angle and position allow for an optimal setting with a wide variety of ration ingredients.
A: Knife set in for slicing and cutting
B: Knife set out for grabbing and tearing
Efficient Mixing Chamber
Straighter sides, smoother curves and steeper baffles help promote a fast, complete mix for a fluffy, palatable ration. No preprocessing or special loading is required for round or square bales making it easy to load and use. Faster auger speeds also provide quicker, more complete cleanout.
Adjustable Hay Stops
The adjustable hay stops provide flexibility in processing to provide you with the cut length necessary to reach the optimal nutritional value you’re striving for. This adjustability makes hay processing more efficient and helps minimize overprocessing.
Large Unloading Doors
For unmatched feed flow, these mixers feature the largest discharge door available in the industry. The discharge linkage allows for rapid opening and closing of the door.
Simple, Dependable Drive
Patented 2-Speed, Split Drive
The patented drive system on the VT 280 and 2100 mixers consists of a 2-speed, split-drive gearbox, two planetary gearboxes and two torque-disconnect PTOs. This system provides reliable performance and long service life with a simple and quiet design. Truck and trailer models only.
The 2-speed, split-drive gearbox provides the flexibility of high and low speeds without adding another gearbox. It allows for a lower horsepower and easier starting speed (28 rpm in low) while also having a high speed for fast mixing and more complete cleanout (41 rpm in high). The gearbox can be shifted manually on the machine or with an in-cab electric shift option for operator convenience.
The twin planetaries are designed to provide dependable performance and long life. The drive systems allow the use of single-stage planetaries, which produces far less heat for easier cooling.
Two automatically resetting torque-disconnect PTOs provide independent protection for each planetary. This helps guard against obstructions encountered by each individual auger, ensuring reliable service and longer life.
Easily pull the planetary from the top of the mixer for improved and easier service. The image shown is from a KUHN Knight VTC model.
Multiple Door Options
Various door configuration options on trailed and stationary models offer flexibility to fit a variety of feeding situations. The large discharge openings provide fast, even unloading from front, side and rear door locations for maximum efficiency.
Choose a front door for clear visibility of the material coming out of the door. The front cross conveyor uses rugged components for unmatched dependability. A heavy-duty, steel floor, along with the heaviest conveyor chain in the industry, helps ensure long life and less down time. New discharge options provide the ultimate in versatility to match most feeding situations.
VT 280/2100 models offer doors on either or both sides. The large openings allow fast unloading with comparable feed flow out of one door that many competitive machines get with two.
A rear commodity door is available. The large opening provides fast discharge, even with high-roughage premixes. A discharge tray is included on truck models to direct material flow for clean, accurate feed placement.
|CAPACITY||VT 280 TRAILER (FRONT|SIDE)|
|Capacity||800 ft³ (22.7 m³)|
|Capacity with Extensions||880 ft³ (25 m³)|
|Maximum Net load||26,400 lbs (11,975 kg)|
|Overall Height||109" (277 cm) ta|
|Overall Height - 10" (25 cm) Belt Extensions||118" (300 cm) ta|
|Overall Height - Single Axle - without Extensions / with Extensions||107" (272 cm)/116" (295 cm)|
|Overall Height - Hay Retention Ring - Inline Dual Wheel Tandem / Oscillating Tandem||113" (287 cm)/115" (292 cm)|
|Overall Length||328" (833 cm) | 295" (749 cm)|
|Mixing Chamber Length||234" (594 cm)|
|Overall Width - Mixer Only (No Discharge)||117" (297 cm)|
|Tread Width - Single Axle||114" (290 cm)|
|Tread Width - Tandem Axle||105" (267 cm)|
|Number of Augers||2|
|Auger RPM - Standard / High Speed||27/41|
|PTO Drive||1,000 rpm|
|PTO Minimum Power Requirement||140 hp (104 kW)|
|Knives per Auger (Standard / Maximum)||5/6|
|Auger Diameter||104" (264 cm)|
|Lower Auger Flighting Thickness||3/4'' (1.9 cm)|
|Upper Auger Flighting Thickness||5/8" (1.6 cm)|
|TUB & TRAILER CONSTRUCTION|
|Axle Configuration||Inline or Oscillating Tandem Axle|
|Unit Weight||Min. 17,800 lbs (8,040 kg) - Max. 22,900 lbs (10,390 kg)|
|Tongue Weight - % Gross||10%|
|Door Opening Size||48" x 40" (112 x 102 cm) | 42" x 40" (107 x 102 cm)|
|Rear Door Opening Size||48" x 40" (112 x 102 cm)|
|Floor Thickness||3/4" (1.9 cm)|
|Sidewall Thickness||1/4" (0.6 cm)|
|Highway Light Kit||Standard|
|Slide Tray - Maximum Height||17" (43 cm)|
|Slide Tray - Maximum Reach||24'' (61 cm)|
|Side Chain & Slat Conveyor - 36"/48" (91/122 cm) - Single Axle - Maximum Reach||39"/49" (99/124 cm)|
|Side Chain & Slat Conveyor - 36"/48" (91/122 cm) - Single Axle - Maximum Height||49"/56" (124/142 cm)|
|Side Chain & Slat Conveyor - 36"/48" (91/122 cm) - Tandem Axle - Maximum Reach||44"/54" (112/137 cm)|
|Side Chain & Slat Conveyor - 36"/48" (91/122 cm) - Tandem Axle - Maximum Height||51"/58" (130/147 cm)|
|Side Belt Conveyor - 36"/48"(91/122 cm) - Single Axle - Maximum Reach||38"/48" (97/122 cm)|
|Side Belt Conveyor - 36"/48"(91/122 cm) - Single Axle - Maximum Height||50"/57" (127/145 cm)|
|Side Belt Conveyor - 36"/48"(91/122 cm) - Tandem Axle - Maximum Reach||43"/53" (109/135 cm)|
|Side Belt Conveyor - 36"/48"(91/122 cm) - Tandem Axle - Maximum Height||52"/59" (132/150 cm)|
|Front Incline Chain & Slat Conveyor - 36" (91 cm) - Single Axle - Maximum Reach||21" (53 cm)|
|Front Incline Chain & Slat Conveyor - 36" (91 cm) - Single Axle - Maximum Height||55" (140 cm)|
|Front Incline Chain & Slat Conveyor - 36" (91 cm) - Tandem Axle - Maximum Reach||26" (66 cm)|
|Front Incline Chain & Slat Conveyor - 36" (91 cm) - Tandem Axle - Maximum Height||57" (145 cm)|
|Front Flat Chain & Slat Conveyor - Maximum Reach||1" (3 cm)|
|Front Flat Chain & Slat Conveyor - Maximum Height||35" (89 cm)|
|Front Flat Chain & Slat Conveyor - Tandem Axle - Maximum Reach||6" (15 cm)|
|Front Flat Chain & Slat Conveyor - Tandem Axle - Maximum Height||37" (94 cm)|
|Front Flat Belt Conveyor - Single Axle - Maximum Reach||1" (3 cm)|
|Front Flat Belt Conveyor - Single Axle - Maximum Height||35" (89 cm)|
|Front Flat Belt Conveyor - Tandem Axle - Maximum Reach||6" (15 cm)|
|Front Flat Belt Conveyor - Tandem Axle - Maximum Height||37" (94 cm)|
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.